Rim Trim Installation How-To Video
Grab Some Rubbing Alcohol
A Little Bit Of Adhesive Promoter is All You Need
When In Doubt, Push As Hard As You Can
Rim Trim Installation How-To Video
Grab Some Rubbing Alcohol
A Little Bit Of Adhesive Promoter is All You Need
When In Doubt, Push As Hard As You Can
INSTALLATION INSTRUCTIONS
*One alcohol prep wipe and one adhesive promoter is provided per two wheels. When using each wipe, work quickly between the two wheels. Correct prep is extremely important for a secure bond of the tape.
Use the provided rubbing alcohol wipe to thoroughly clean the edge of your rim. Move quickly from rim to rim thoroughly cleaning each wheel. Use additional rubbing alcohol and a rag for thorough cleaning, resulting in an oil free surface.
Reapply pressure over the trim to confirm a strong bond.
Allow each wheel to dry. Place the provided glove on your hand. Carefully open the provided adhesive promoter. Allow the promoter to only touch your gloved hand. Thoroughly apply the adhesive promoter to the edge of each rim, moving quickly from wheel to wheel. Safely discard of the promoter and glove. Keep out of reach of children.
Apply the provided, clear gap strip to where the Rim Trim meets itself on each wheel.
Allow promoter to dry, which has now created
a tacky surface.
A minimum of 24 hours for bonding is required before washing or driving vehicle.
Peel a two inch section off of the underside of the Rim Trim tape liner. Precisely move around the wheel, lining up the trim and peeling the tape liner from between the rim and trim. Press firmly as you move along the rim. Apply to all four rims.
Use the provided rubbing alcohol wipe to thoroughly clean the edge of your rim. Move quickly from rim to rim thoroughly cleaning each wheel. Use additional rubbing alcohol and a rag for thorough cleaning, resulting in an oil free surface.
Allow each wheel to dry. Place the provided glove on your hand. Carefully open the provided adhesive promoter. Allow the promoter to only touch your gloved hand. Thoroughly apply the adhesive promoter to the edge of each rim, moving quickly from wheel to wheel. Safely discard of the promoter and glove. Keep out of reach of children.
Allow promoter to dry, which has now created
a tacky surface.
Peel a two inch section off of the underside of the Rim Trim tape liner. Precisely move around the wheel, lining up the trim and peeling the tape liner from between the rim and trim. Press firmly as you move along the rim. Apply to all four rims.
Reapply pressure over the trim to confirm a strong bond.
Apply the provided, clear gap strip to where the Rim Trim meets itself on each wheel.
A minimum of 24 hours for bonding is required before washing or driving vehicle.
PRO TIPS
Grab Some Rubbing Alcohol
Our kit includes some alcohol wipes, but they won't do the job if your wheels are more than a little bit dirty. We recommend getting a bottle of rubbing alcohol (or an alcohol-based cleaner) and cleaning your wheels as carefully as possible before using the included alcohol wipes.
A Little Bit Of Adhesive Promoter is All You Need
Adhesive promoter is kind of like cologne or body spray - a little bit goes a long way. We provide just two packages of adhesive promoter with a set of Rim Trim because we don't want you to put all the adhesive promoter you can on one wheel. Instead, split the adhesive promoter across two wheels, and apply it in a thin, even layer.
When In Doubt, Push As Hard As You Can
Once you've cleaned the wheels very thoroughly and your thin layer of adhesive promoter is tacky, it's time to apply the Rim Trim. Be sure to go slow, and to apply steady pressure to every inch of Rim Trim. Even a tiny air bubble is enough to weaken the bond between the wheel and the Rim Trim. So, be sure to push!
