Skip to content

ALL-FIT FLEX TRIM

Stand out by adding chrome or carbon fiber accents or blackout your vehicle with versatile, adhesive backed trim.

AFA_FlexTrim_1
AFA_FlexTrim_2
AFA_FlexTrim_3

EASY INSTALLATION

AFA_FlexTrim_Installation
AFA_FlexTrim_1:4_Sprite
1/4"

10ft Retail Packaged

AFA_FlexTrim_3:4_Sprite
3/4"

10ft Retail Packaged

AFA_FlexTrim_1:2_Sprite
1/2"

10ft Retail Packaged

AFA_FlexTrim_1_Sprite
1"

10ft Retail Packaged

AFA_FlexTrim_1:4_Sprite
1/4"

10ft Retail Packaged

AFA_FlexTrim_1:2_Sprite
1/2"

10ft Retail Packaged

AFA_FlexTrim_3:4_Sprite
3/4"

10ft Retail Packaged

AFA_FlexTrim_1_Sprite
1"

10ft Retail Packaged

AVAILABLE COLORS

Before

AFA_FlexTrim_Left
AFA_FlexTrim_Colors_2022

After

AFA_FlexTrim_Right

INSTALLATION INSTRUCTIONS

AFA_EdgeTrim_Install_Icon_1
Choose sections of your vehicle to apply the trim.
AFA_FlexTrim_Install_Icon_5
Peel off foot long sections of adhesive liner as you apply the trim.
AFA_RimTrim_Install_Icon_2
Thoroughly clean desired section with 50/50 mixture of rubbing alcohol and water. Allow to dry.
AFA_EdgeTrim_Install_Icon_6
In minimal temperatures of 65°F, firmly press trim to desired location.
AFA_EdgeTrim_Install_Icon_3
Cut trim to desired length.
AFA_EdgeTrim_Install_Icon_7
Reapply pressure over the trim to confirm a strong bond.
AFA_EdgeTrim_Install_Icon_4
Masking tape can be applied to your vehicle in the desired location beforehand to provide a guide.
AFA_EdgeTrim_Install_Icon_8
A minimum of 24 hours for bonding is required before washing vehicle.
AFA_EdgeTrim_Install_Icon_1
Choose sections of your vehicle to apply the trim.
AFA_RimTrim_Install_Icon_2
Thoroughly clean desired section with 50/50 mixture of rubbing alcohol and water. Allow to dry.
AFA_EdgeTrim_Install_Icon_3
Cut trim to desired length.
AFA_EdgeTrim_Install_Icon_4
Masking tape can be applied to your vehicle in the desired location beforehand to provide a guide.
AFA_FlexTrim_Install_Icon_5
Peel off foot long sections of adhesive liner as you apply the trim.
AFA_EdgeTrim_Install_Icon_6
In minimal temperatures of 65°F, firmly press trim to desired location.
AFA_EdgeTrim_Install_Icon_7
Reapply pressure over the trim to confirm a strong bond.
AFA_EdgeTrim_Install_Icon_8
A minimum of 24 hours for bonding is required before washing vehicle.

OUR GALLERY

View our large gallery showcasing the All-Fit products on all shapes of cars. Our kit fits EVERY car, including yours! Don't see your car? Contact us, and we will gladly send you pictures.

See more by following @allfitautomotive on Instagram

See more by following @allfitautomotive on Instagram

OTHER ALL-FIT ACCESSORIES

ALL-FIT LIP KIT

EDGE TRIM

DUAL FLEX

BUMPER QUICK RELEASE