Spanning from 2003 to 2007 (and continuing into the early GMT900 era for certain platforms up to '09), Cat Eye Chevy trucks have that aggressive, slanted front-end aesthetic that makes classic Bowtie fans fall in love. They are sought-after in the custom truck scene for lowering, lifting, and aggressive wheel setups.
But a clean Cat Eye build isn't complete if the side moldings are scuffed, discolored, or missing entirely. Replacing them is the quickest way to elevate your truck from a worn-out work truck to a clean-line custom look. All-Fit '03-'09 Chevy Replacement Body Side Molding is the easiest upgrade you can make to your rig's exterior.
How Much Do Chevy Body Side Moldings Cost?
Tracking down NOS (New Old Stock) or custom-cut reproduction trim kits can easily drain your build budget, often setting you back north of $300. To add insult to injury, those high-dollar kits almost never include the necessary mounting clips or retaining hardware. You're left playing a frustrating game of scavenger hunt on forums and in junkyards just to figure out how to actually attach the stuff to your freshly painted sheet metal.
Instead of fighting with obsolete hardware, a hefty 26-foot roll of premium adhesive molding puts the control right back in your garage. It’s the ultimate DIY solution. You get to measure and cut the exact lengths required for your specific cab, doors, and bed configuration. Skip the headache of gambling on expensive, pre-cut packages that might not line up perfectly with your rig - just measure, trim to fit, and apply for a custom-tailored profile.
Replacement '03-'09 Silverado And Tahoe Moldings From All-Fit Automotive
Get door ding protection and upgrade your classic Chevy with ease. Our side molding is easy to install, requires no drilling, and can be removed without damaging paint. Follow the chart below to find replacement body side moldings for other classic makes and models:
| Vehicle Fitment | All-Fit Body Molding |
| 1973–1987 Chevy / GMC | Square Body Side Molding |
| 1983–1990 Chevy / GMC / Toyota | Body Side Molding |
| 1988–1999 Chevy / GMC | GMT400 OBS Body Side Molding |
| 1987–1991 Ford F-Series | Bricknose/Bronco Side Molding |
| 1992–1996 Ford F-Series | OBS Ford Body Side Molding |
| 1994–1997 Dodge Ram | Body Side Molding |
| 1999–2007 Silverado / Tahoe | GMT800 Body Side Molding |
| 2003–2009 Silverado / Tahoe | GMT900 Body Side Molding |
Since 2011, All-Fit Automotive has been engineering premium auto accessories for enthusiasts who prefer turning their own wrenches. We manufacture our high-quality body side molding kits right here in the USA:
- Easy, No-Drill Install: Fast, peel-and-stick application means you can complete the upgrade right in your driveway.
- Durable, Long Lasting 3M Adhesive: Engineered with industrial-strength 3M backing to survive both the trails and the daily commute.
- Original Factory Look and Finish: Gives you that crisp, clean factory line that completes the aggressive Cat Eye look.
- Universal Fit Compatible with OE Emblems: Designed to route cleanly alongside your Silverado or Tahoe factory badges.
- Affordable Alternative to Custom-Cut Kits: Get massive curb appeal without draining your parts budget.
Keep your rig’s metal body panels safe from careless door dings, runaway shopping carts, and creeping rust with our heavy-duty body side moldings. Ready to dial in your vehicle's profile? Explore our full range of body side moldings, and explore our full catalog of auto accessories, protective automotive trims and customization trims online. Contact us with any questions, and order today!
