Skip to content

Lowest Price Guaranteed. Free 2-Day Shipping!*

Auto Accessories That Fit, Look Great, and Last

Call or Text (619) 500-3669

How To Make Bumper Release Band Last Longer

Quick release

Bumper release bands are a great addition to your vehicle because they:

Yet, bumper release bands come with a drawback: they’ll break eventually. It’s because the UV rays from the sun break down the rubber. Like rust, you can try to stop the rubber breakdown, but nature always wins.

The good news is there are ways to prolong the life of your bumper release bands:

1. Park Inside Or In The Shade Whenever You Can

The sun is your bumper release bands’ worst enemy. As long as you keep them out of direct sunlight, the rubber won’t be so quick to dry out and break. The rubber will degrade over time because rubber doesn’t last forever. Yet, keeping your car out of the sun as much as possible will make a difference. The bands will last much longer.

Try to make a point to park in a garage, a parking garage, or the shade.

2. Use A Car Cover

If you have no choice but to park in direct sunlight often, consider investing in a car cover. Be sure to get a car cover that’s breathable and has all-weather protection. A car cover will help prolong the life of your bumper release bands.

3. Be Sure Not To Install The Buttons Too Far Apart

When the rubber bumper release bands have too much tension, they’ll stretch out. When exposed to the sun often enough, the stretched out bands will break sooner than later.

So when you install your bumper release bands, be sure that the buttons are the right distance from each other. You want to create the right amount of tension.

While installing All-Fit Bumper Quick Release Bands, make sure that the distance between the center of both holes is 2.25”. This makes the total width of the band from edge to edge of the band stretch about 3” wide. You can stretch the All-Fit bands a little more for a stronger pull if necessary.

It’s A Good Idea To Have An Extra Set Or Two On Hand

Quick release band

When the bands wear out too much, they break. That can be quite detrimental, especially if you’re driving. That’s why it’s always a good idea to have an extra set or two on hand.

If you order All-Fit Bumper Quick Release Bands from us, you’ll get a discount if you order two sets of replacement bands!

Related Content

How To Make Bumper Release Band Last Longer

August 6, 2021

Bumper release bands are a great addition to your vehicle because they: Keep a loose bumper on your vehicle Let you quickly remove your bumper Enhance the look of your vehicle Yet, bumper release bands come with a drawback: they’ll break eventually. It’s because the UV rays from the sun break down the rubber. Like…

Read More

3 Reasons You Might Want A Bumper Quick Release

October 29, 2019

Have you heard of bumper quick releases? They’re a fun, affordable product with several different uses. Read on to find out how bumper quick releases can help you. What are Bumper Quick Releases? A bumper quick release is a set of fasteners that are used to attach a bumper cover to the body of a…

Read More

What to Do When Your Bumper Cover is Loose

July 3, 2019

It’s common for a bumper cover to come loose after a while. Usually it’s because of vibration, a minor impact, or just aging. When a bumper cover comes loose, it loses its ability to provide adequate protection. The good news is that you don’t have to replace the whole bumper cover. Depending on what the…

Read More

How to Make a Quick Release Bumper Cover

May 15, 2019

Bumper covers or standard bumpers can be quite expensive to replace. Even a single broken mounting tab can lead to the bumper cover dragging on the ground. Rather than blow hundreds of dollars on a new bumper cover (the plastic or fiberglass that fits directly over the bumper), you can make a quick release bumper.…

Read More